Please input the truth inquiry code

  

F.A.Q

(English and Chinese)

Q1:
How to upgrade PS3 system software to version 3.41 ?
A1:
1. Create a root folder on the storage media in which to save the update data.
 
2. Download the update data and save it in the UPDATE folder created in step.
 
Be sure to save the update data as noted below. If the data is not saved in the correct way, the PS3 system will not recognize the update data. Folder names must be in all uppercase letters.
•    Location: Save in the "PS3" folder > "UPDATE" folder
•    File name: Save as file name "PS3Updat.PUP".

3、Insert the storage media or USB device. that contains the update data in the PS3 system.
4. From the home menu, select (Settings) > (System Update), and then press the ○ button.
5. Select [Update via Storage Media], and then press the ○ button.
The system automatically searches for and finds the update data saved on the storage media or USB device.
6. Start the update data.
Press the ○ button to start the update data. Follow the on-screen instructions to complete the update.
You can delete the update data from the storage media or USB device after the update has been successfully completed.
•    Do not turn off the PS3 system or remove storage media or USB device during an update. If an update is cancelled before completion, the system software may become damaged, and the system may require servicing or exchange.
•    The power button on the PS3 system front is not active during an update.
Q2:
How to install the PS3break?
A2:
This product release at blank USB dongle,you may burn any available firmware depend to your need.
Q3:
Is PS3break easy to install?
A3:
Yes, it is a groundbreaking plug & play solution. It can be fully installed in seconds, without modifying or opening your console.
Q4:
Does it permanently modify my console?
A4:
Certainly not, once the PS3break is removed, it is completely disabled.
Q5:
What is the warranty?
A5:
PS3break is sold with a 1 year warranty. Our distributors and retailers will take care of all warranty issues.
Q6:
When burning, why the status is always "Verify Started'? Can it be plugged out?
A6:
Yes, the green light of the electronic dongle flashed for 5-10 times, which means burning is successfully finished. Plug it out and use it as normally.
Q7:
Why it is said an unknow USB device was found in the menu when I connect the PS3break with PS3. In addition, the dongle’s green light isn’t lighting?
A7:

Refering to this message, it means the dongle doesn’t work normally. You need to check the following operations:

1. All external USB devices should be removed(including the USB cable to the controller) from the PS3 machine before the PS3 is started up.

2. Ensure the disc drive of the PS3 is empty

3. Ensure the PS3 system firmware is V3.41

4. On the precondition as the above mentioned. Do as following:

(1) It’s important to make sure the power was cut off.

(2) Insert the PS3break dongle to the PS3 device.
(3) connect the power jack with PS3 device to enter its ready mode.
(4) Power on the console and press the Eject button very quick. The green light of the dongle will be flashing shortly after a sound beep from the console
(5) Once the sytem menu is appeared on the screen, the green light will switch on, which indicating the dongle works well. If not, you need to repeat this process.

Q8:
why the “manager.pkg ” file wasn’t appeared when I executed Install Package Files in the menu ?
A8:

Refering to this problem, please sovle it as the following steps:

1. Ensure the dongle green light is switched on. If not, please refer to Q5.
2. To ensure a copy of Backup Manager (manager.pkg) file in FAT32 format is copied on it. And it’s stored in the root volumn of the external USB storage. Otherwise, It will be failure.
3. With the above 2 conditions are fulfilled, intert the external USB storage, choose “Install Package Files”, the “manager pkg” will come up,then choose and execute it.

 

Q9:
when I came back to the Games menu, to choose “Backup Manager”, the joystick of the controller refused to work, and cannot choose the files in the menu ?
A9:
To load up the game, a leading disc is needed for loading the PS3 games by inserting any original BD game disc into the drive of the PS3
Q10:
After I finished the backup of the file, I chose the game in “Backup Manager”menu, and execute “load”, an error message appeared, “please insert the original BD game disc”. Why ?
A10:
To load up the game, a leading disc is needed for loading the PS3 games by inserting any original BD game disc into the drive of the PS3
Q11:
When I loaded the created backup game, it was back to Games menu, the game what I wanted hasn’t been loaded. What’s the reason ?
A11:
It’s normal, When you came back to Games menu, you may find the just created backup games was above the icon of “Backup Manager”. Choose and execute it.
Q12:
What is “manager.pkg”? What's it for ? Why I cannot open “Manager.pkg” on my PC ?
A12:
Manager.pkg is a homebrew firmware for PS3 system,and it can be run with PS3 system only, which cannot be indentified by PC. The method of manager.pkg setup, please refer to Q6.